{"id":8400,"date":"2020-11-14T18:53:19","date_gmt":"2020-11-14T17:53:19","guid":{"rendered":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/?p=8400"},"modified":"2020-11-14T18:53:38","modified_gmt":"2020-11-14T17:53:38","slug":"air-system","status":"publish","type":"post","link":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/2020\/11\/14\/air-system\/","title":{"rendered":"Caring for the Air System That Feeds Your Brakes"},"content":{"rendered":"

Photo: Jim Park<\/em><\/i><\/span><\/p>\n

Hose lengths will make a difference when looking to protect against wear and chafing.<\/b><\/span><\/p>\n

The emergency and supply lines that stretch between a tractor and trailer offer a colorful reminder that compressed air is the lifeblood of your brake system. The hoses are a respective red and blue, like arteries and veins in an anatomical drawing. That would make the compressor your air system\u2019s heart; obstructions in the air lines like plaque that forms on an artery wall.<\/span><\/p>\n

Maybe there should be little surprise that truck drivers often overlook brake hoses and tubing. People still die of preventable heart attacks.<\/span><\/p>\n

The components will be under some added scrutiny in August as enforcement officials recognize Brake Safety Awareness Month. Brake Safety Week, hosted from Aug. 23-29, includes its own special focus on the all-important pathways for the air.<\/span><\/p>\n

\u201cFailure of any component of a brake system could be catastrophic,\u201d says Commercial Vehicle Safety Alliance (CVSA) president John Samis, a sergeant with Delaware State Police. \u201cRoutine brake system inspections and component replacement are vital to the safety of commercial motor vehicles.\u201d<\/span><\/p>\n

Even the smallest leaks in the air supply can add up to big problems.<\/span><\/p>\n

\u201cWe\u2019ve had incidents where it\u2019s gotten so bad the system won\u2019t replenish fast enough, and the air loss is so significant you\u2019ll actually partially apply the spring brakes and cause brake drag,\u201d says Randy Petresh, vice-president \u2013 technical services at Haldex. \u201cThe compressor can only run so long and so fast.\u201d<\/span><\/p>\n

There are plenty of tools to warn truck drivers about outright failures, of course. The gauge on the dash measures the pressure at hand. Warning lights and buzzers are triggered when pressures drop toward the dangerous territory of 55 psi.<\/span><\/p>\n

But there are also early warning signs of trouble to come. A frequently cycling compressor, an unusual amount of oil draining from the air tanks, and a worn hose covering are all causes for concern.<\/span><\/p>\n

Luckily, there are also strategies to help prevent future air system shortcomings, and they\u2019re as effective as low-fat diets and exercise when it comes to ensuring a healthy heart.<\/span><\/p>\n

Improving Gladhands and Air Lines<\/span><\/h2>\n

Bruce McKie, the president of Tectran \u2013 a producer of air, hydraulic, and electrical components \u2013 sees plenty of room for improvement where the tractor and trailer join together.<\/span><\/p>\n

Air lines have been known to kink at the gladhand in the face of multiple hookups, he says as an example, making the case for spec\u2019ing flexible hand grips that can help relieve the stresses. In contrast, a rigid grip will actually create troublesome sharp angles.<\/span><\/p>\n

\u201cPeople don\u2019t think enough about the other reason for failure at the gladhand end, which is the stress on that section of the hose during hard right turns,\u201d McKie adds. \u201cMost hose connections are on the driver side of the tractor and trailer, making the distance to the trailer gladhand connection longer than during a left turn, particularly for the red, emergency line.\u201d<\/span><\/p>\n

Choosing proper hose lengths from a parts counter will clearly make a difference here. Some coiled lines available in today\u2019s market are barely 15 feet long, even though they should measure 17 to 18 feet, he says.<\/span><\/p>\n

The quality of the hose will make a difference as well. Cheaper versions may carry SAE or DOT markings, but fracture during cold impact tests, McKie says, referring to options that are sometimes made with reground rubber. That makes working with a trusted supplier particularly relevant.<\/span><\/p>\n

High-quality air lines include multiple plies, which will make a difference in its ability to withstand forces such as temperature, road salt, and road debris, Petresh adds.<\/span><\/p>\n

Even the newest trucks are not immune from hose-related issues. Some OEMs don\u2019t look at the connections as part of a broader system, McKie insists. The end result can be unmatched tractor lead lengths between air and electrical lines, poorly attached clamps at the end of the spring tender kits, or a spring rate that fails to keep the air lines off the deck.<\/span><\/p>\n

Issues like those can be solved by spec\u2019ing the related air and electrical components, spring tenders, and gladhands as a complete kit, he says.<\/span><\/p>\n

The threats of cuts, chafing and wear are not limited to the space between a tractor and trailer, of course. Poorly routed air lines anywhere across the vehicle can rub against all sorts of hard surfaces as equipment bounces and sways down the highway.<\/span><\/p>\n

Petresh stresses the need to take a close look at the path for any newly installed hoses, and consider how things like suspension components will shift about as a truck rolls down the road.<\/span><\/p>\n

\u201cToo long, they can contact other parts of the vehicle, whether it\u2019s a frame member or a suspension component,\u201d he says.<\/span><\/p>\n

\"Too<\/span>
\n

Too much oil passing through the compressor can lead to contamination downstream, as seen in this purge valve. <\/span>Photo: Bendix<\/em><\/span><\/p>\n<\/figcaption><\/figure>\n

Bugs, Rust, and Other Debris<\/span><\/h2>\n

The threats are not all external, either.<\/span><\/p>\n

Disconnected gladhands can open a path for insects that like to crawl inside orifices and make themselves at home. Combine the bugs with dirt and other debris from a fleet yard, and there are plenty of contaminants that can enter an air system and ultimately wear down seals or clog valves.<\/span><\/p>\n

Gladhand seals that incorporate pie-cut flaps offer a simple line of defence, McKie says. Other options include stainless steel gladhand filters.<\/span><\/p>\n

Inline trailer filters can also capture contaminants that have entered the system, says Steve Edie, Meritor\u2019s senior manager \u2013 air systems. The protective components are simply unscrewed when it\u2019s time for cleaning during a preventive maintenance check.<\/span><\/p>\n

It\u2019s not the only point where an upgrade might make a difference, especially in the face of aggressive deicing compounds sprayed on today\u2019s highways.<\/span><\/p>\n

Gladhands with painted clamps have been known to rust, but there are other options such as stainless-steel clamps and gladhands made of anodized aluminum.<\/span><\/p>\n

Even the air dryers designed to treat the air are under attack.<\/span><\/p>\n

Full-feature air dryers tend to be mounted somewhere on the frame rail, which subjects them to the corrosive effects of highway de-icing compounds, explains Rich Nagel, Bendix director of marketing and customer solutions \u2013 air supply and powertrain. To compound problems, fluctuating temperatures lead to the ongoing freeze and thaw cycle that increases corrosion across the board.<\/span><\/p>\n

The air dryer bodies can pit and form leaks, he says, adding that related ports and pressure protection valves can be attacked as well.<\/span><\/p>\n

Then there\u2019s the related wiring to consider.<\/span><\/p>\n

\u201cThere a heater in the dryer,\u201d Nagle says, \u201cand the heater has a harness.\u201d<\/span><\/p>\n

Wet Air and Winter Woes<\/span><\/h2>\n

That air dryer is in place to help combat another ongoing threat that travels through hoses. Moisture that hangs in the air generated by a compressor will condense as it cools, creating unwanted pools downstream, and even icing in place depending on the weather.<\/span><\/p>\n

While airline antifreeze can attack such ice, to free locked brakes, its use is discouraged. At the very least, its use should be limited.<\/span><\/p>\n

\u201cYou\u2019re introducing a fluid in there that\u2019s not planned to be there, that\u2019s not designed to be there,\u201d Edie says. The viscous fluid likes to cling to moving parts, and it can wreak havoc with internal seals.<\/span><\/p>\n

\"Oil<\/span>
\n

Oil coalescing filters are becoming increasingly popular as a defensive tool to protect everything from transmissions to emissions components that tap into the air system. <\/span>Image: Bendix<\/em><\/span><\/p>\n<\/figcaption><\/figure>\n

Oil Coalescing Filters<\/span><\/h2>\n

Meanwhile, oil that passes through the air lines can be a sign of other trouble upstream.<\/span><\/p>\n

A little bit of oil will pass through even the newest compressors, but the volumes can easily increase to excessive levels \u2013 especially as engines run hotter in the name of performance. It can create some costly damage downstream, especially when it comes to the automated transmissions and emission-related components that tap into the same air supply, Edie says.<\/span><\/p>\n

The attacks don\u2019t end there. The oil can lead to the premature death of brake chamber diaphragms, dash valves, and spring brake modulating valves alike. And every deteriorating seal contributes to leaks that can ultimately ground a tractor-trailer during a brake blitz.<\/span><\/p>\n

One of the best lines of defense here will come in the form of oil coalescing filters, which Edie says are becoming increasingly popular.<\/span><\/p>\n

Still, don\u2019t discount problems with the compressor itself.<\/span><\/p>\n

A compressor that faces an excessive duty cycle will run hot, and the oil will create a buildup of carbon on the discharge line, Nagle says, offering one sign of trouble.<\/span><\/p>\n

Single-piston compressors may be lighter and less expensive than the dual-piston designs that were commonplace 20 years ago, but they are also more prone to vibration-related wear, he adds.<\/span><\/p>\n

When it comes time to actually replace a compressor, keep in mind that the quality of remanufactured components will vary as well. A truly remanufactured compressor comes with pistons re-honed to a factory finish, he says as an example. Cheaper versions may simply be cleaned up, and incorporate substandard replacement components.<\/span><\/p>\n

You get what you pay for.<\/span><\/p>\n

Valves and Connectors<\/span><\/h2>\n

The path for the air is not limited to the hoses and tubes, of course. It\u2019s directed to good use through a series of valves, and decisions at the parts counter will make a difference here as well.<\/span><\/p>\n

There are probably 20-30 different part numbers associated with a basic R12 valve, Petresh says, referring to differences that can range from port locations to crack pressures. Reaching for the wrong option can affect brake balance.<\/span><\/p>\n

Nagle, meanwhile, refers to unwanted restrictions that can be created if someone reaches for a \u00bc-inch line in place of a 3\/8-inch line during a quick repair, or introduces 90-degree fittings to redirect an air line on a new path.<\/span><\/p>\n

\u201cYou\u2019re not going to get the same response,\u201d he says. \u201cPeople don\u2019t take that into account, and they\u2019ll come up with crazy solutions to overcome an interference.\u201d<\/span><\/p>\n

\u201cWhen you change the inside diameter of the hose, you change the length of it, you\u2019re impacting the pressure of the system,\u201d Edie agrees. \u201cThat can affect, for instance, the timing and the activation of the brakes and cause uneven braking applications.\u201d<\/span><\/p>\n

\u201cShould you have a brake problem caused by the air system, replace both sides,\u201d he suggests. \u201cThat way you have an equivalent system on both sides, and you don\u2019t take that problem you just fixed and move it to the other side.\u201d<\/span><\/p>\n

Preventive Maintenance Inspections<\/span><\/h2>\n

Over time, the condition of the related connections and fittings will also need to be inspected.<\/span><\/p>\n

Little issues like small cracks around the outside diameter of a push-to-connect fitting may not actually shut down a truck on their own, but they can contribute to broader problems, Nagle says. The best way to spot issues like these will involve a simple bubble test, brushing on a layer of dish soap to spot any minor leaks.<\/span><\/p>\n

Taking the time to watch for such weaknesses will pay dividends in the way systems perform. It\u2019s why Petresh suggests a thorough bubble check every couple of years, perhaps aligning the work with the replacement of the air dryer cartridge.<\/span><\/p>\n

\u201cAir systems by their very nature leak. They\u2019re not leakproof,\u201d he says. \u201cThat\u2019s why you have a renewable power source in the compressor.\u201d<\/span><\/p>\n

 <\/p>\n

by John G. Smith, Today’s Trucking<\/p>\n

Source: https:\/\/www.truckinginfo.com<\/a><\/span><\/p>\n

CUT COTS OF THE FLEET WITH OUR AUDIT PROGRAM<\/strong><\/a><\/h3>\n

\"\"<\/a><\/p>\n

The audit is a key tool to know the overall status and provide the analysis, the assessment, the advice, the suggestions and the actions to take in order to cut costs and increase the efficiency and efficacy of the fleet. We propose the following fleet management audit.<\/p>\n

FLEET MANAGEMENT AUDIT<\/strong><\/a><\/h3>\n","protected":false},"excerpt":{"rendered":"

Photo: Jim Park Hose lengths will make a difference when looking to protect against wear and chafing. The emergency and supply lines that stretch between a tractor and trailer offer a colorful reminder that compressed air is the lifeblood of your brake system. The hoses are a respective red and blue, like arteries and veins…<\/p>\n","protected":false},"author":3,"featured_media":8401,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[18],"tags":[53],"_links":{"self":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/8400"}],"collection":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/comments?post=8400"}],"version-history":[{"count":1,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/8400\/revisions"}],"predecessor-version":[{"id":8402,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/8400\/revisions\/8402"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media\/8401"}],"wp:attachment":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media?parent=8400"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/categories?post=8400"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/tags?post=8400"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}