{"id":13449,"date":"2022-03-26T16:23:47","date_gmt":"2022-03-26T15:23:47","guid":{"rendered":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/?p=13449"},"modified":"2022-03-26T16:24:25","modified_gmt":"2022-03-26T15:24:25","slug":"suspensions","status":"publish","type":"post","link":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/2022\/03\/26\/suspensions\/","title":{"rendered":"Steering retention with well-maintained suspensions"},"content":{"rendered":"

To keep drivers in your fleet\u2019s seats, make sure your trucks don\u2019t provide a bumpy ride.<\/p>\n

According to the Professional Driver Agency (PDA) Top Ten Driver Issues List of 2021<\/a>, mechanical breakdowns frustrate drivers more than anything else. This study\u2019s sample size was made up of tens of thousands of drivers over several years, PDA said, so fleets should take heed that the cost of downtime isn\u2019t just measured in lost miles or missed deliveries, but also in how long a driver will tolerate their truck\u2019s shop time.<\/p>\n

It\u2019s important to note that drivers, who are in high demand, won\u2019t put up with road time fraught with misery, where poorly maintained shocks cause them to feel every bump in their bones, or poorly lubed components cause the steering wheel to shake. Over time, those can lead to physical breakdowns, with drivers calling off to get treatment for a nagging musculoskeletal injury. Or they\u2019ll simply resign.<\/p>\n

Spec\u2019ing the right equipment for the duty cycle, combined with a proper preventive maintenance strategy, solid pre-trip inspections, and good driver habits are the surest way to avoid breakdowns in general. You also want to keep the driver\u2019s body from breaking down. Prioritizing the spec\u2019ing and maintenance of the suspension and steering systems becomes an elegant solution to both.<\/p>\n

\u201cFront axle and suspension maintenance is critical to ensuring the vehicle is being kept in prime condition,\u201d said Sam Marco, senior product manager for front axle at Meritor, which makes suspensions, axles, and associated parts such as kingpins. \u201cAnd that ultimately will translate to less driver fatigue and a driver staying focused when they\u2019re behind the wheel.\u201d<\/p>\n

To reduce that fatigue through the development of new products, Marco looks at reducing three factors: noise, vibration, and harshness (NVH).<\/p>\n

\u201cAll of those factors strain other components on the vehicle and then ultimately translate to potential driver fatigue,\u201d he explained.<\/p>\n

To reduce that fatigue, and keep drivers more comfortable at their company, fleet managers and maintenance supervisors need to understand how the various factors fit together. Everyone looks at these issues with a different lens, so to help discern the best approach for your fleet or shop, we gathered points of view from a variety of stakeholders. There is no one-size-fits-all approach, but the following advice should help steer your strategy in the right direction.<\/p>\n

The driver\u2019s perspective<\/h3>\n

\u201cIt makes a big difference when you got the right suspension,\u201d asserted Bernie Gray, an owner-operator for about 30 years, who recently moved over to a driver trainer at J.J. Keller & Associates, a transportation safety consulting firm.<\/p>\n

\n
\n
\n
\n
\n
\n
\"&ldquo;If<\/div>\n<\/div>\n<\/div>
\u201cIf you and your drivers take care of your suspension, your money comes back two-fold,\u201d said Bernie Gray, an owner-operator for more than 30 years who recently took a safety training job at J.J. Keller.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n

Gray started out in an old-school Class 8 truck with a \u201ckitchen chair for a driver\u2019s seat,\u201d\u00a0 \u201carmstrong\u201d steering (meaning you literally needed bulging biceps to keep the truck centered), and a leaf spring suspension that felt more like steel rods bolted to the chassis. In the mid 1990s, he got his first air ride suspensions and power steering.<\/p>\n

\u201cThat made life so much easier,\u201d he recalled.<\/p>\n

Life on the road was still hard, going for weeks on end hauling freight.\u00a0Even with the best maintenance and comfortable ride, the road catches up with a body.<\/p>\n

\u201cWhat I used to be able to accomplish when I was younger is way different than what I can accomplish today,\u201d he noted.<\/p>\n

After 3 million safe miles, Gray opted for the trainer gig, teaching box truck and step-van drivers, along with some heavy-duty truckers, safe driving and pre- and post-trip inspections. Gray asserted that if he were to take on more freight, he would opt for a more comfortable ride versus slightly higher pay.<\/p>\n

\u201cI would much rather lease onto a company that has good, maintained trailers with air ride suspension, rather than spring ride, especially as an owner-operator, because I don’t want that trailer beating up on me,\u201d Gray surmised.<\/p>\n

He said a bouncy trailer will tug at the tractor, and compensating for that strains the driver\u2019s body while also risking damage to freight and exacerbating wear and tear on the truck.<\/p>\n

Air ride systems cost more, and there are additional maintenance considerations. Air ride suspensions require air lines from the compressor, along with a regulator valve. The air bags themselves are also vulnerable to tears and damage.<\/p>\n

\u201cIf you and your drivers take care of your suspension, your money comes back two-fold,\u201d Gray said of air ride systems. He said part of this is due to less overall maintenance on the tractor-trailer, adding that third-party logistics carriers will also have a wider pool of customers, because \u201cmost shipping companies want air ride suspension over the spring rides.\u201d<\/p>\n

Gray also noted drivers who leave a fleet with best-in-class ride and steering will soon realize how good they had it after 1,000 painstaking miles in their new fleet\u2019s truck with a suspect suspension. Call it resigner\u2019s remorse.<\/p>\n

Shop perspective<\/h3>\n

\u201cI have been everything from a lube technician to a director of maintenance, and truck drivability and comfort has always been an issue,\u201d said Tim Lamoreaux, truck service manager at North American Trailer, in Inver Grove Heights, Minnesota. \u201cThe drivers are in the trucks for 10-plus hours a day and to fight a pull in the steering or deal with vibration is understandably frustrating and fatiguing. I have seen drivers leave because of a drivability issue.\u201d<\/p>\n

Lamoreaux also worked at Blaine Brothers\u2019 TruckAline business, which as the name suggests, handles alignments and other axle and suspension service items. The services are also used in-house on Blaine Brothers\u2019 fleet of light- and medium-duty trucks, as well as tow trucks.<\/p>\n

They use a mix of preventive maintenance scheduling and driver feedback.<\/p>\n

\u201cOur vehicles are on our PM program\/schedule to monitor for upcoming or unexpected issues, and our heavy tow trucks are aligned whenever the steer axle tires are replaced or if there is a concern reported from our drivers on their DVIR,\u201d noted Blaine Brothers CEO Dean Dally.<\/p>\n

Dally also advised to seek out regular alignments at a reputable alignment shop.<\/p>\n

\u201cA good alignment shop should identify potential issues that may arise based on current tire wear patterns and with a good thorough inspection before doing the alignment,\u201d he said.<\/p>\n

This goes a long way in maximizing steer tire life.<\/p>\n

\u201cIf the truck was aligned each time the steer tires were replaced, at a minimum, a lot of drivability issues could be avoided,\u201d Dally asserted.<\/p>\n

Lamoreaux added that shops should not align a truck with worn steering or suspension parts.<\/p>\n

\u201cKingpins, steering linkages, and suspension pivot points are always checked and anything with play is shown to the customer to let them know our recommendation and let them decide whether to proceed,\u201d he said. \u201cExcessive play will not be aligned, and customers will be advised on repairs needed.\u201d<\/p>\n

\n
\n
\n
\n
\n
\n
Photo: Blaine Brothers TruckAline<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n<\/figure>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\n
\n
\n
\"Lasers<\/div>\n<\/div>\n<\/div>
Lasers mounted to the wheel help a technician get a precise alignment. The tech should always test drive the truck after to ensure accuracy.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n

When alignments are done, Lamoreaux said an absolute must is making sure one person is designated to pre-drive the truck and also test drive that truck when it comes off the rack. He suggested some high-volume shops just go off what the computer says in terms of the positive\/negative value of the laser alignment. Technicians should test-drive to confirm proper alignment.<\/p>\n

This help shops retain customers, too, as a driver who feels off-balance after a fresh alignment would likely not return.<\/p>\n

\u201cWe get drivers coming in from all over the country, and some of our biggest complaints that you\u2019ll hear from drivers is when the truck just shakes and is always pulling in one direction,\u201d said Irvin Bowman, owner of Ohio-based maintenance provider Wayne Truck and Trailer.<\/p>\n

Bowman said many technicians aren\u2019t sure what to look for, but the fix can be quite simple. For example, one might think the steering box is the issue when the truck is pulling, and replacing that leads to more cost and downtime. \u201cFifty percent of the time, it’s not the box when you start getting complaints that way,\u201d Bowman said.<\/p>\n

The root cause more likely is a dry fifth wheel, which impedes the trailer\u2019s movement.<\/p>\n

\u201cThat makes the whole truck kind of feel like it\u2019s darting back and forth on the road,\u201d Bowman said. \u201cIt is rather nerve-racking if you ever take one for a drive.\u201d A faulty kingpin may also be a culprit.<\/p>\n

Wayne\u2019s technicians are taught to check the basic, more common causes of steering issues first. This includes ensuring the wheels are greased, checking that U-joints and axle components move freely, and verifying adequate oil flow and pressure, Bowman said.<\/p>\n

He also pointed out ignoring power steering fluid maintenance could have a big impact, which would affect the steering box. Power steering fluid could \u201cgo from doing great to terrible in a short amount of time,\u201d he warned. Routine visual checks with a dipstick would alleviate this. If the fluid is not clear, but more brownish and foamy, there is a problem.<\/p>\n

\u201cThere are a lot of trucks out there that have never had a filter changed on the power steering fluid\u2014you\u2019ll see them 10 years old or more sometimes come in with the original,\u201d Bowman chuckled.<\/p>\n

But what happens to the system as a result is no laughing matter. A low-level condition, from a leak or lack of steering fluid change-out, combined with a poor filter will cause the pump to cavitate.<\/p>\n

\u201cThe pump starts shedding some metal, and it doesn\u2019t take too long for that to take the whole system down,\u201d Bowman said. Contaminants entering through the valves could also dilute the fluid and cause the truck to wander, he added.<\/p>\n

Steering OE Perspective<\/h3>\n

Manufacturers also have found steering maintenance isn\u2019t always a top priority.<\/p>\n

\u201cIt\u2019s a pretty simple thing to keep up on from a fleet standpoint, but we see a lot of times that there are fleets that don\u2019t maintain the steering system at all,\u201d said Jonathon Gerke, product manager at Bendix Commercial Vehicle Systems. This is based off examining returned steering gears. Bendix, which supplies aftermarket parts, also owns RH Sheppard.<\/p>\n

Exact intervals are in the owner\u2019s manual, but Gerke said steering fluid should be changed annually or every 100,000 miles.<\/p>\n

\u201cAs that fluid breaks down over time, it\u2019s not giving the lubricity,\u201d Gerke explained. \u201cAlso, a lot of high-pressure seals in the gear start to break down as well because the fluid has a lot of contaminants in it.\u201d<\/p>\n

A problem is that steering troubleshooting is more specialized, and some technicians opt to simply replace the box. Gerke noted this \u201cis not the most economical way,\u201d as the manufacturer can reject warranty claims if the box is not the issue. Training and implementing a power steering analyzer (a type of pressure and flow gauge) would verify if the steering gear box is bad.<\/p>\n

As Meritor\u2019s Marco stated, the goal is to prevent NVH, which can crop up due to misalignments or worn components.<\/p>\n

To verify a misalignment, investigate the tire wear pattern, Marco said.<\/p>\n

\u201cTires are your key indicators of a problem, specifically within the front axle or within the suspension,\u201d he said. Feathering is a dead giveaway. The tire will exhibit single-edge wear with cupping, or flat patches in the center.<\/p>\n

\n
\n
\n
\n
\n
\n
Photo: Meritor, Inc.<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n<\/figure>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\n
\n
\n
\"Aftermarket<\/div>\n<\/div>\n<\/div>
Aftermarket suppliers such as Euclid provide all-makes replacement parts for suspension systems.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n

A proper driver pre-check should detect this. Visual inspection will also spot tie rod issues. A driver or technician can then feel for movement to confirm suspicions. Fleets should also investigate when the driver mentions shaking or vibrating at certain rpms or speeds, Marco advised.<\/p>\n

Staying consistent on kingpin lubing, as well as aligning the suspension whenever the tires are changed, are two easy methods to circumvent future steering issues as well as extend tire life, he said.<\/p>\n

Suspension OE side<\/h3>\n

On the suspension side, maintenance is less of a concern, though that doesn\u2019t mean they should be ignored.<\/p>\n

\u201cThe parts of the suspension that are moving or operating on a regular basis over time are going to wear out,\u201d explained Don Hester, senior program manager at Hendrickson.<\/p>\n

The air springs warrant extra attention, as they are always working, so be sure to check for damage or wear.<\/p>\n

\u201cShrapnel off the road can shoot into your suspension and slice the side of the air spring,\u201d Hester said. \u201cMaybe it\u2019ll start as a small leak, but you need to pay attention or you\u2019ll have significant damage to the air spring.\u201d<\/p>\n

Bill Hicks, SAF-Holland product manager, advised to \u201cperiodically check for road gravel or other abrasive debris between the cell and the piston and the bead plates. Removing the debris will help to prevent air cell abrasion and premature failure.\u201d<\/p>\n

Rubber extruding out of the side of the suspension can indicate damaged pivot bushings. This is more likely for severe off-road trucks, but a seriously unbalanced tire can also cause this, Hester said.<\/p>\n

To prevent premature bushing and\/or bushing core failure, technicians should also ensure the pivot fastener provides sufficient clamp load through the bushing, explained Hicks. \u201cTherefore, it is good practice to re-torque the pivot connections every time you do a routine brake job, or every 50,000 to 100,000 miles,\u201d he said. \u201cIn severe-duty applications, where brake jobs are performed more frequently, it is important to check torque more often.\u201d<\/p>\n

For new trailers, Hicks said that in order to ensure correct assembly and prevent damage, torque ratings must be checked on all critical fasteners at about 5,000 miles.<\/p>\n

\u201cUsing a calibrated torque wrench is the only way to ensure they are at the correct torque level,\u201d David Cary, chief engineer at Hutchens Industries, recommended. \u201cToo much torque could damage components or the fasteners. Too little torque can result in wear of the components and fasteners.\u201d<\/p>\n

It\u2019s more difficult to identify shock absorber issues. Working shocks heat up during use, so Hester advised to drive around first.<\/p>\n

\u201cGet this trailer bouncing up and down a little bit, bring it back into the shop, and then check the temperature of that shock relative to other steel components,\u201d Hester said. \u201cIf they’re not warm, that probably means they’re not doing anything.\u201d<\/p>\n

Hester said a technician can use a thermal imager, and a working shock will be 10 to 20 degrees Fahrenheit above ambient temperature.<\/p>\n

Hicks advised to visually inspect shocks weekly. This also helps detect leaks.<\/p>\n

On the mechanical side, Hicks said new trailers should get their alignment checked after 1,000 miles. Every six months, or 25,000 miles (whichever comes first), leaf springs should get a thorough visual check and maintenance, if needed.<\/p>\n

A technician should also re-torque all fasteners at that time, Hicks advised. This includes axle connection U-bolts, center equalizer bolts, the torque arms (both fixed and adjustable), and the spring retainer hold down bolts.<\/p>\n

Trailers also are more prone to corrosion, as they have little to deflect road salt splashing up.<\/p>\n

\n
\n
\n
\n
\n
\n
Photo: SAF-Holland<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n<\/figure>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\n
\n
\n
\"The<\/div>\n<\/div>\n<\/div>
The Neway ADZ drive axle air ride suspension offers better stability for off-road applications and cuts overall weight by up to 250 lbs.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n

Hicks noted SAF suspension systems are treated with a hot dip galvanized level protection called Black Armour, which \u201cchemically bonds with metal to form a protective layer that is impervious to water and stands up against the harsh anti-icing agents used on roadways.\u201d<\/p>\n

Cary said corrosion is often a hot topic, though recent design innovations have alleviated the issue. \u201cProper placement of drain holes, better frame designs and better coatings have gone a long way to curb that issue,\u201d he said.\u00a0\u201cIf an area of corrosion appears to have affected the structural integrity of a part, the manufacture should be consulted.\u201d<\/p>\n

And while not every technician is an expert in dealing with the systems that are crucial to driver comfort and freight integrity, Cary said that treating suspension maintenance like any other PM will result in less downtime.<\/p>\n

\u201cIf it is kept up, it will have a minimal impact on your bottom line,\u201d Cary concluded. \u201cIf a problem goes unchecked, it can lead to much larger issues with a greater impact on the company\u2019s bottom line.\u201d<\/p>\n

 <\/p>\n

by John Hitch<\/a><\/span><\/p>\n

Source: https:\/\/www.fleetmaintenance.com\/<\/a><\/span><\/p>\n

\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n

KNOW WHO WE ARE<\/strong><\/a><\/h1>\n

\"\"<\/a><\/p>\n<\/div>\n

\n

KNOW THE FLEET MANAGEMENT YOUTUBE CHANNEL<\/strong><\/span><\/h1>\n

 <\/p>\n<\/div>\n

\"\"<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

To keep drivers in your fleet\u2019s seats, make sure your trucks don\u2019t provide a bumpy ride. According to the Professional Driver Agency (PDA) Top Ten Driver Issues List of 2021, mechanical breakdowns frustrate drivers more than anything else. This study\u2019s sample size was made up of tens of thousands of drivers over several years, PDA…<\/p>\n","protected":false},"author":3,"featured_media":13450,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[18],"tags":[53],"_links":{"self":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/13449"}],"collection":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/comments?post=13449"}],"version-history":[{"count":2,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/13449\/revisions"}],"predecessor-version":[{"id":13452,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/13449\/revisions\/13452"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media\/13450"}],"wp:attachment":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media?parent=13449"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/categories?post=13449"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/tags?post=13449"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}