During the early days of COVID, the Kenan Advantage Group<\/a>\u00a0(KAG) struggled with the best protocol for cleaning the truck\u2019s cab used by a driver who came down with COVID-19 symptoms. The largest bulk liquid hauler in North America, KAG has 7,000 drivers and just as many trucks in its fleet, which operates throughout the U.S, Canada and Mexico.<\/p>\n Kirk Altrichter, KAG\u2019s executive vice president of fleet services, said that his fleet, like others in the early days of the pandemic, needed to develop a plan for equipment that could be contaminated with COVID.<\/p>\n \u201cHiring somebody to come in and clean the truck was very expensive,\u201d he said during an educational session at the American Trucking Associations\u2019 2021 TMC Spring Virtual Meeting<\/a> hosted by TMC\u2019s Cab & Controls Study Group. \u201cNone of our technicians, none of our personnel wanted to get into the cabs to clean them. We later decided to just quarantine the truck for three to five days. We started with five days and then quickly moved to three days.\u201d<\/p>\n After a three-day truck quarantine, the staff then went into the cab, wiped down all the surfaces, and did a thorough cleaning.<\/p>\n For years, trucking companies have been looking for the best ways to clean cabs. But in 2020, the main reason for finding the best way to clean a driver\u2019s workspace changed.<\/p>\n \u201cWhy is there a need for in-cab cleaning and deodorizing?\u201d Altrichter asked during the April 20 session. \u201cFor many years, we\u2019ve been doing this as trucking companies for slip-seated trucks and drivers.\u201d<\/p>\n Session moderator John Adami, principal at NW Heavy Duty<\/a>, noted: \u201cI don\u2019t think anybody would disagree that truck cabs and sleepers haven\u2019t always been the most hygienic or healthy working environments. It\u2019s incumbent upon us to address the bigger picture of cleanliness and health \u2014 not just the current pandemic \u2014 when it comes to cleaning.\u201d<\/p>\n Until the COVID-19 pandemic made people think differently about sterilizing workspaces, truck companies were focused on fighting the residue and odor left by cigarette smoke and other dirt and grime that builds up inside the cab. This was done to make the truck ready for the next driver for fleets that share trucks or to fight potential bug infestations. Fleets also would focus on cab cleaning in advance of selling trucks, Altrichter noted. And while fleets are still concentrated on clean cabs for resale and other reasons, things changed in 2020.<\/p>\n \u201cMost recently, I think, it\u2019s more about bacteria and viruses,\u201d Altrichter said. And when it comes to fighting bacteria and viruses, there are good products for inside the cab, as well as cleaning products that fleets should avoid because they could damage the equipment.<\/p>\n Adami noted there are two approaches to cleaning inside cabs: chemicals and devices. \u201cWhen it comes to cleaning, there\u2019s no one product, there\u2019s no one solution,\u201d he said. \u201cIt\u2019s a layered process.\u201d<\/p>\n Scott Harris, president of Environmental Quality Management<\/a>, suggested that fleets rely on a U.S. Environmental Protection Agency (EPA) list of disinfectants that fight SARS-CoV-2, the virus that causes the COVID-19 disease.<\/p>\n The EPA expects all products on its List N<\/a> to kill the coronavirus when used according to the product\u2019s label instructions. These products can come as sprays, wipes, concentrates or fogs, for example. Harris said it\u2019s important to note the \u201ccontact time\u201d for each product. Contact time is the amount of time the surface should be treated for. The surface should be visibly wet for the duration of the contact time, which varies by product.<\/p>\n Contact times to kill COVID-causing germs can vary from 15 seconds to 10 minutes, in which the product must remain wet on a surface to do its job.<\/p>\n Harris said that if a product says it \u201ckills 99.9% of germs \u2014 or something between 99% and 99.99%, it\u2019s not going to be true for the human coronavirus\u2026 that\u2019s really intended for a very small list \u2014 like salmonella or E. coli or something like that \u2014 in laboratory conditions.\u201d<\/p>\n He also said to be wary of any product that claims it \u201ckills on contact,\u201d noting that it would take at least 15 seconds of wetness to kill SARS-CoV-2 and it could take up to 10 minutes for some products, according to the EPA\u2019s List N.<\/p>\n For example, ethanol wipes need five minutes on a surface before killing most germs. Lysol disinfecting spray and wipes need 10 minutes to do the job.<\/p>\n While bleach can be one of the best things to clean and kill germs on surfaces \u2014 and is readily available \u2014 most OEMs recommend against cleaning inside cabs with bleach because the fumes could damage circuit boards and other electronics in the trucks, Altrichter said. Straight bleach can also damage or discolor cab surfaces.<\/p>\n But TMC\u2019s Cab & Controls Study Group, in consultation with the Centers for Disease Control and OEMs, found that \u2153 cup of bleach diluted with a gallon of water can effectively disinfect surfaces. (The ratio, Altrichter noted, should not exceed \u00bd cup of bleach per gallon of water.)<\/p>\n \u201cAfter using diluted bleach, the cab surfaces should be wiped down again with mild soap and water to remove any bleach residue,\u201d Altrichter noted, as he walked educational session attendees through each part of the cab.<\/p>\n Switches and controls: <\/b>Use mild soap and water or diluted bleach. Do not use ammonia. \u201cThe recommendation for the purposes of COVID-19 is to start with diluted bleach and then wipe them down with soap and water to remove the bleach residue.\u201d<\/p>\n Seat belts\/vehicle restraint system:<\/b> Use mild soap and water. Diluted bleach is acceptable for metal and plastic buckle pieces but should not be used on webbing, stitching or strapping as it can discolor them. Do not use ammonia.<\/p>\n Steering wheel:<\/b> For leather steering wheels, wipe (do not soak) with mild soap and water, followed by a leather conditioner. Diluted bleach or 70% isopropyl alcohol may be used but will likely dry out the leather and affect its appearance. Do not use ammonia.\u00a0For non-leather steering wheels, mild soap and water or diluted bleach can be used. Do not use alcohol or ammonia.<\/p>\n Seat adjustment controls: <\/b>For metal or plastic seat controls, use mild soap and water or diluted bleach. Do not use ammonia.<\/p>\n Door handles and grab bars:<\/b> Mild soap and water, diluted bleach or 70% isopropyl alcohol works. Do not use ammonia.<\/p>\n Seat cushion cleaning: <\/b>Use only fabric cleaners or steam clean can seats. It is OK to use 70% isopropyl alcohol for surface wiping only. Do not use any bleach (diluted or otherwise). Do not use ammonia.<\/p>\n Information touch screens: <\/b>Screens with touch film and anti-glare surface treatments are sensitive to chemicals, Altrichter noted. He said it\u2019s best to clean them with mild soap and water or use an LCD cleaner that does not contain alcohol or ammonia. Do not clean displays with any bleach. Do not use alcohol. Do not use ammonia.<\/p>\n Interior trim pieces: <\/b>Use mild soap and water or diluted bleach to clean interior trim. Do not use ammonia.<\/p>\n Air purification has found some success during the pandemic with needlepoint bi-polar ionization (NPBI), a technology that releases ions into airstreams through an HVAC system in a building or environmental control systems within a vehicle.<\/p>\n Charlie Waddell, founder and CTO of Global Plasma Solutions<\/a>, which offers NPBI technology, said there are a lot of products that have come to market lately claiming to be able to clean the air of particulates.<\/p>\n \u201cThis type of technology can be effective at reducing particulate in the space and also helping to reduce virus particles that are out there in the air as well,\u201d Waddell said. \u201cThese ions that are generated from what we call needlepoint bi-polar ionization are already naturally occurring. If you have an air ion counter and you go out to waterfalls or if you go to the ocean, you can actually see very high levels of ions in these locations. So what you’re trying to do with this type of technology is recreate those good environments \u2014 but do it in a safe manner without producing ozone as a byproduct.\u201d<\/p>\n The CDC has recently noted that bi-polar ionization technology has matured, and earlier safety concerns about it have been resolved. The CDC suggests that those considering an ionization product to be sure the equipment meets UL 2998 standard certification<\/a>, which is intended to validate that no harmful ozone levels are produced.<\/p>\n \u201cUsing this technology in your trucks or your buildings can reduce your particulate, which is going to help with the transmission highway of the pathogen itself,\u201d Harris said. \u201cIt’s also good for mold, bacteria, viruses \u2014 not just a COVID-19 strategy. It’s effective against many different types of bacteria and viruses. I want to point out it’s not the silver bullet, but it is a great layer in this fight against pathogens.\u201d<\/p>\n As Adami noted earlier, when it comes to properly and thoroughly cleaning truck cabs, it truly is a layered process.<\/p>\n<\/div>\n <\/p>\n By Josh Fisher<\/a><\/span><\/p>\n Source: https:\/\/www.fleetowner.com\/<\/a><\/span><\/p>\n The audit is a key tool to know the overall status and provide the analysis, the assessment, the advice, the suggestions and the actions to take in order to cut costs and increase the efficiency and efficacy of the fleet. We propose the following fleet management audit.<\/p>\n From bleach to bi-polar ionization, there isn\u2019t one best solution to cleaning truck cabs and combatting COVID-19. But there are good practices fleets can use to keep drivers and other staff safe. During the early days of COVID, the Kenan Advantage Group\u00a0(KAG) struggled with the best protocol for cleaning the truck\u2019s cab used by a…<\/p>\n","protected":false},"author":3,"featured_media":10798,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[18],"tags":[302,6],"_links":{"self":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10797"}],"collection":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/comments?post=10797"}],"version-history":[{"count":1,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10797\/revisions"}],"predecessor-version":[{"id":10799,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10797\/revisions\/10799"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media\/10798"}],"wp:attachment":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media?parent=10797"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/categories?post=10797"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/tags?post=10797"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}List N products<\/h3>\n
How to clean each part of the cab<\/h3>\n
Air purifying the cab<\/h3>\n
CUT COTS OF THE FLEET WITH OUR AUDIT PROGRAM<\/strong><\/a><\/h3>\n
![\"\"](\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-content\/uploads\/sites\/3\/2020\/04\/nueva-ley-auditoria.jpg\")
<\/a><\/p>\nFLEET MANAGEMENT AUDIT<\/strong><\/a><\/h3>\n","protected":false},"excerpt":{"rendered":"