{"id":10401,"date":"2021-03-23T13:12:59","date_gmt":"2021-03-23T12:12:59","guid":{"rendered":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/?p=10401"},"modified":"2021-03-23T13:12:59","modified_gmt":"2021-03-23T12:12:59","slug":"cabin-leaks","status":"publish","type":"post","link":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/2021\/03\/23\/cabin-leaks\/","title":{"rendered":"Smoke out cabin leaks"},"content":{"rendered":"<p style=\"text-align: justify;\"><span style=\"color: #0000ff;\">Utilizing a smoke machine and a pressurized cabin, technicians can pinpoint the location of a leak at the seam of the windshield.<\/span><\/p>\n<div id=\"content-body-21126291\" class=\"page-contents__content-body\" style=\"text-align: justify;\">\n<p><span style=\"color: #0000ff;\">Cabin air leaks are more than just a noisy annoyance to the operator of a vehicle; a leaking seam around the edges of the windshield is hazardous and a potential catalyst for further maintenance issues. The ability to accurately detect the location of a leak is critical in ensuring no damage to electrical systems arises via unwanted entry of moisture into the cab of a vehicle.<\/span><\/p>\n<h3><span style=\"color: #0000ff;\">What could go wrong?<\/span><\/h3>\n<p><span style=\"color: #0000ff;\">Notice of a leaking windshield will usually reach the maintenance department by way of a driver telling someone they can hear air hissing into the cab as they are driving. However, there is more to be concerned with than the driver\u2019s discomfort.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">The dashboard in today\u2019s commercial vehicle is full of electrical components and connections. With the dashboard being the immediate point of contact behind the windshield, these electrical systems are susceptible to damage should a leak be present around the windshield.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">A leak can allow more than just air into the cab \u2013 particularly water. Water making its way into the dashboard, and subsequently contacting any electrical components, can wreak havoc on various systems.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">The use of electronic logging devices (ELDs) was congressionally mandated for commercial vehicle drivers logging their hours of service through the Federal Motor Carrier Safety Administration (FMCSA), as part of the Moving Ahead for Progress in the 21st Century Act (MAP-21). Enforcement for this mandate took effect in December of 2019. Even if not required by mandate due to an exemption, many fleets have opted to install ELDs \u2013 typically on the dash and in close proximity to the windshield.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">As with many electronic devices, a vehicle\u2019s ELD is also susceptible to water damage. Should a windshield with a leaking seam allow moisture to come into contact with an ELD, the result could be far more costly than merely replacing the device. This is just one example of critical electrical components in the cab that are susceptible to damage by way of a leaking windshield.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Other examples of susceptible equipment include any windshield-mounted devices such as cameras, radar, or GPS systems. Any and all electrical connections on the dash and around the windshield have the potential to cause problems beyond damage, such as operational failure and safety issues. In some extreme cases, an air leak may allow exhaust fumes to leak into the cab of the vehicle.<\/span><\/p>\n<h3><span style=\"color: #0000ff;\">Seal the deal<\/span><\/h3>\n<p><span style=\"color: #0000ff;\">\u201cWindshields are a big problem; they\u2019ve always been a big problem with the gluing aspect,\u201d says Hawkins.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">A replaced windshield that was not properly installed, dried glue or rubber along the seam on an older vehicle, or even body damage that was never properly addressed could all be causes of a cabin air leak. Whatever the case may be, the leak needs to be addressed sooner rather than later.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Though it may not seem like an issue that could take a vehicle out of commission, there is a constant risk of further damage should a leak remain unsealed.\u00a0 \u00a0 \u00a0 \u00a0 \u00a0<\/span><\/p>\n<h3><span style=\"color: #0000ff;\">Cabin leak detection<\/span><\/h3>\n<p><span style=\"color: #0000ff;\">Though a driver can usually hear a cabin air leak, they can rarely pinpoint the leak\u2019s precise location. Technicians acknowledge that the detection process for pinpointing a leak from the windshield can be tedious. As a result, technicians have become innovative, as the tools used to accurately spot such a leak are not designed to do so as their primary application.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">A maintenance facility most likely already has a smoke machine on-site for diagnosing intake and exhaust system leaks or, if servicing light duty vehicles, finding evaporative emission control (EVAP) system leaks. A smoke machine can also help detect cabin wind and water leaks.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Mark Hawkins, manager, technical products, at Redline Detection, explains how fleets can perform a simple procedure to accurately detect a leak at the seam of a windshield. Redline Detection is a manufacturer of professional diagnostic leak detection equipment.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Hawkins first recommends turning the key to the \u201con\u201d position, without turning the engine on. Then, a technician would turn on the dashboard air vent to the high setting to allow fresh air to enter the cab. Next, to create a sealed environment, roll up the windows and close the doors. \u201cWhat that does is provide a positive pressure inside the cab,\u201d Hawkins says.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">To search for a leak, a technician would then walk around the outside of the vehicle with the smoke machine, blowing smoke along any area where a leak may be suspected \u2013 including along edges and seams.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">With the cabin\u2019s positive pressure and a smoke machine, leaks can be detected fairly quickly by noticing a deflection of the smoke as it is passing along the seams of the windshield.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">\u201cThe positive pressure forces air out of the cab at [the location of the leak] and it and deflects the smoke in the opposite direction that it is flowing out of the smoke hose,\u201d Hawkins says.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Detecting cabin leaks should be done at a low pressure.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">\u201cYou\u2019re going be inside when you do this [procedure]; if you\u2019re outside, forget it,\u201d says Chuck Abbot, vice president, global automotive, CPS Products. CPS Products designs and manufactures tools, instruments, and service equipment to deliver leak detection technologies. \u201cIf there is any wind, it will cause a disruption in the smoke pattern. And you certainly don\u2019t want to be standing next to a blowing fan [during this procedure]. So, it does require being in a rather still area.\u201d<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Abbott also suggests utilizing a diffuser on the smoke hose.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">\u201cIf you don\u2019t diffuse the smoke, it is coming out rather rapidly, and it\u2019s hard to disturb a rapid movement of smoke,\u201d Abbott says. He advises that with a rapid movement of smoke, a technician would be unable to see a disruption in the smoke pattern at the leak location.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">\u201cUse a device that diffuses and slows down the flow of smoke and causes the smoke to basically sit in suspension over the potential leak area. [This allows] you to see the slightest interruption,\u201d he adds.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">\u201cIt is such a simple, clean procedure, and it keeps the cab completely isolated and clean. You\u2019re not getting any vapor inside of the cab,\u201d says Alex Parker, CMO of Redline Detection. \u201cIt\u2019s a very quick procedure that, if used either in repair or PM, gives you 100 percent confidence in being able to find the leak point.\u201d<\/span><\/p>\n<p><span style=\"color: #0000ff;\">The team at Redline Detection recommends fitting this procedure into preventive maintenance schedules to stay ahead of moisture intrusion and the maintenance implications should a leak remain undetected and un-serviced.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">After the leak point is detected and repaired, performing the detection procedure again establishes a system to \u201cquality control your repair,\u201d Hawkins says.<\/span><\/p>\n<p><span style=\"color: #0000ff;\">Utilizing a smoke machine and a pressurized cabin, technicians can quickly, easily, and confidently pinpoint the location of a leak at the seam of the windshield, seal the leak, and keep the vehicle up and running.\u00a0<\/span><\/p>\n<\/div>\n<p>&nbsp;<\/p>\n<p>By <span class=\"page-attribution__content-name\"><a href=\"https:\/\/www.fleetmaintenance.com\/home\/contact\/21074912\/tyler-fussner\">Tyler Fussner<\/a><\/span><\/p>\n<p><span class=\"posted-by\">Source: <a href=\"https:\/\/www.fleetmaintenance.com\" target=\"_blank\" rel=\"noopener noreferrer\">https:\/\/www.fleetmaintenance.com<\/a><\/span><\/p>\n<h3 style=\"text-align: center;\"><a href=\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/consultancy\/\" target=\"_blank\" rel=\"noopener noreferrer\"><strong>CUT COTS OF THE FLEET WITH OUR AUDIT PROGRAM<\/strong><\/a><\/h3>\n<p style=\"text-align: justify;\"><a href=\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/consultancy\/\"><img loading=\"lazy\" class=\"aligncenter wp-image-5377\" src=\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-content\/uploads\/sites\/3\/2020\/04\/nueva-ley-auditoria.jpg\" sizes=\"(max-width: 858px) 100vw, 858px\" srcset=\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-content\/uploads\/sites\/3\/2020\/04\/nueva-ley-auditoria.jpg 2000w, https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-content\/uploads\/sites\/3\/2020\/04\/nueva-ley-auditoria-300x200.jpg 300w, https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-content\/uploads\/sites\/3\/2020\/04\/nueva-ley-auditoria-1024x682.jpg 1024w\" alt=\"\" width=\"858\" height=\"572\" \/><\/a>The audit is a key tool to know the overall status and provide the analysis, the assessment, the advice, the suggestions and the actions to take in order to cut costs and increase the efficiency and efficacy of the fleet. We propose the following fleet management audit.<\/p>\n<h3 style=\"text-align: center;\"><a href=\"https:\/\/advancedfleetmanagementconsulting.com\/eng\/consultancy\/\" target=\"_blank\" rel=\"noopener noreferrer\"><strong>FLEET MANAGEMENT AUDIT<\/strong><\/a><\/h3>\n","protected":false},"excerpt":{"rendered":"<p>Utilizing a smoke machine and a pressurized cabin, technicians can pinpoint the location of a leak at the seam of the windshield. Cabin air leaks are more than just a noisy annoyance to the operator of a vehicle; a leaking seam around the edges of the windshield is hazardous and a potential catalyst for further&#8230;<\/p>\n","protected":false},"author":3,"featured_media":10402,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[18],"tags":[53],"_links":{"self":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10401"}],"collection":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/comments?post=10401"}],"version-history":[{"count":1,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10401\/revisions"}],"predecessor-version":[{"id":10403,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10401\/revisions\/10403"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media\/10402"}],"wp:attachment":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media?parent=10401"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/categories?post=10401"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/tags?post=10401"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}