{"id":10039,"date":"2021-03-02T13:52:11","date_gmt":"2021-03-02T12:52:11","guid":{"rendered":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/?p=10039"},"modified":"2021-03-02T13:52:11","modified_gmt":"2021-03-02T12:52:11","slug":"wide-base-tires","status":"publish","type":"post","link":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/2021\/03\/02\/wide-base-tires\/","title":{"rendered":"Are Wide-Base Tires Still Worth the Effort?"},"content":{"rendered":"

Photo: Jim Park<\/i><\/span><\/p>\n

Wide-base single tires offer fuel and weight savings, but getting the best life from the tire may require a little extra effort.<\/b><\/span><\/p>\n

When they first appeared on the market, wide-base single tires were touted as fuel- and weight-saving wonders. Nobody disputes the weight savings, but recent versions of low-rolling-resistance dual tires have significantly narrowed the wide-singles\u2019 lead on fuel efficiency. As a result, a fair number of fleets have given up on wide-base tires, unwilling to put up with what they saw as rapid wear, less-than-optimal retreadability, and driver concerns about traction and being left stranded by a blow-out.<\/span><\/p>\n

Many other fleets, however, have stuck with their wide singles and report great tire life, great fuel mileage, and a satisfactory ownership experience. What gives? Is it the tire? Is it the truck? Is it the fleet\u2019s tire maintenance program?<\/span><\/p>\n

It\u2019s probably a bit of all three.<\/span><\/p>\n

Mike Beckett, president of MD Alignment Services, makes a living solving his customers\u2019 tire wear and vehicle handling problems. He\u2019s seen every tire wear issue you can imagine, so he understands the causes \u2014 and it\u2019s usually not the tire, he says.<\/span><\/p>\n

\u201cWide-base singles work better for some people than others,\u201d he says. \u201cI think what separates the two is the ability to tightly control the operation and the tire\u2019s working environment. You have to have the right inflation pressure, you have to use the right axles, and you have to keep the alignment right. Fleets that stay on top of all that are usually successful.\u201d<\/span><\/p>\n

We have previously reported on Beckett\u2019s assertion that thin-walled axle tubes and lighter-weight axles are susceptible to flexing that can cause rapid wear of a tire\u2019s inner shoulder. He says the phenomenon is present on drive and trailer axles running dual as well as wide-base tires, but it\u2019s more pronounced in single tires, especially those mounted on large-offset wheels.<\/span><\/p>\n

\u201cWhen the axle deflects upward, the bottom of the tire scoots out. When it scoots back in, it chops the inside edge off a wide-base tire or the inside edge off the inside tire in a dual assembly,\u201d he says. \u201cTwo-inch offset wheels can exacerbate the problem by pushing the load center further outboard, adding a greater cantilever effect on the axle tube, causing a temporary negative camber condition as the axle flexes.\u201d<\/span><\/p>\n

\"Stiffening<\/span>
Stiffening the axles can reduce flex and preserve the inner shoulders.<\/span><\/p>\n

Photo: Jim Park<\/span><\/p>\n<\/figcaption><\/figure>\n

Lately, he has been suggesting fleets that are having problems with inner shoulder wear take steps to stiffen the axles by welding a section of angle-iron across the top of the center section of the axle tube and two shorter pieces of angle iron outboard of the suspension.<\/span><\/p>\n

\u201cCustomers tell us it solves the inside shoulder wear problems,\u201d Beckett tells HDT. \u201cIf you want the benefits of wide-based tires but not the exaggerated inner shoulder wear, you should probably pay attention to your axle specifications. Opt for the thicker axle tubes and eat the 20 extra pounds.\u201d\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/span><\/p>\n

Beckett\u2019s assertion is disputed by some suspension and axle manufacturers, but he stands by it.<\/span><\/p>\n

Michelin\u2019s guidance on wide-single tires is similar to Beckett\u2019s. Wide-base singles are subject to the same operational dynamics as dual tires. Tire pressure, vehicle load and alignment, operational application, and road type all have an impact on how a tire wears and performs, Michelin says.<\/span><\/p>\n

\u201cLike steer tires that are mounted in single assembly, wide-single tires on drive or trailer axles demand the same attention and care,\u201d says Karl Remec, business segment manager, long-distance transportation, at Michelin North America.<\/span><\/p>\n

Mechanical deficiencies<\/span><\/h2>\n

Tires, as we\u2019ve noted many times, usually don\u2019t self-destruct. They exhibit wear characteristics imposed by external forces, such as bad alignment or loose or worn suspension components. Tires respond to their environment, and if the environment isn\u2019t conducive to a long and happy life, the tire suffers the consequences.<\/span><\/p>\n

Beckett says dual tires and wide-base singles respond the same way to various mechanical problems, but the signs of wear are usually amplified because there\u2019s only one tread face rather than two across which the signs are distributed.<\/span><\/p>\n

\u201cThey aren\u2019t necessarily more susceptible to wear, they just show the signs more clearly,\u201d he says. \u201cThey seem to be less forgiving than dual tires.\u201d<\/span><\/p>\n

\"Inside<\/span>
Inside shoulder wear may not be the fault of the tire, but the result of excessive flexing of lightweight axles or loose wheel bearings.<\/span><\/p>\n

Photo: Jim Park<\/span><\/p>\n<\/figcaption><\/figure>\n

Many tire problems can be traced to mechanical conditions in the vehicle, so to obtain maximized tire performance, vehicles must be properly maintained, and that includes drive-axle and trailer-axle alignment \u2013 practices that are not widespread among fleets.\u00a0<\/span><\/p>\n

\u201cAlignment refers not only to the various angles of the steer axle geometry, but also to the tracking of all axles on a vehicle,\u201d says Michelin\u2019s Remec. \u201cThe dual purpose of proper alignment is to minimize tire wear and to maximize predictable vehicle handling and driver control. Along with misalignment, improper inflation pressure and the inappropriate use of a tire\/retread design for a particular application can all limit the life of a tire.\u201d<\/span><\/p>\n

Owner-operator Henry Albert, who aggressively pursues his fuel economy target of 10+ mpg, swears by his wide-base single tires. Last fall he retired a set of Michelin X One Energy drive tires after 380,000 miles. He says there were still 3\/32 of tread rubber left, but with winter approaching he wanted a little more rubber down below.<\/span><\/p>\n

\u201cThat\u2019s good tire mileage, and it\u2019s not unusual for wide-singles to run out like that if you look after them,\u201d he says. \u201cI align the truck regularly with the MD Alignment tools and vigorously maintain 100-psi inflation pressure with the help of a tire pressure monitoring system.\u201d<\/span><\/p>\n

Inflation is critical<\/span><\/h2>\n

Wide-base single tires appear to be more sensitive to incorrect inflation pressure than dual tires. While fleets routinely \u201cover-inflate\u201d their dual tires to 100 psi, it has been suggested that over-inflating wide singles can distort the shape of the tire, especially when lightly loaded, causing the center of the tread face to make contact with the road rather than even contact across the tread face. This, Beckett explains, changes the circumference of the tire and results in scrubbing of the shoulder areas, which increases shoulder wear.<\/span><\/p>\n

Excess speed can cause the same problem on some brands, Beckett says. \u201cThe centrifugal forces acting on the center of the tread face cause it to grow taller than the shoulders. The shoulders are attached to the sidewalls, so they can\u2019t maintain the same circumference as the center, and you get scrubbing of the shoulders as a result.\u201d\u00a0<\/span><\/p>\n

Over-inflating also renders the tire more susceptible to damage.<\/span><\/p>\n

\u201cOver-inflated tires increase the likelihood of crown cuts, impact breaks, punctures, and shock damage resulting from the decrease of sidewall flexing and an increase in firmness of the tread surface,\u201d Remec says. \u201cMaintain all tires at the target inflation pressure based on the manufacturers\u2019 application data book for the particular axle load.\u201d<\/span><\/p>\n

Michelin\u2019s recommendation for its current X One Energy Line D 445\/50R22.5, for example, is 100 psi for a fully loaded drive or trailer axle at 17,000 pounds. Bridgestone\u2019s load and inflation tables also recommend 100 psi for its 445\/50R22.5 wide-base tires. Other manufacturers have their own recommendations.<\/span><\/p>\n

As for the issue of blowouts leaving trucks stranded and unable to \u201climp in\u201d for a repair, Albert stresses that he has never heard of properly inflated tires blowing out unless they hit something on the road.<\/span><\/p>\n

\u201cUnderinflated tires run hot, the rubber compounds break down or the sidewalls flex excessively, and the tire explodes,\u201d he says. \u201cIt happens all the time, but its not the tire\u2019s fault that it\u2019s under-inflated. My tire pressure monitoring system is the best investment I have ever made in my tires.\u201d<\/span><\/p>\n

Besides, limping in, even with dual tires, is a DOT violation. \u00a0\u00a0<\/span><\/p>\n

All that said, fleets that don\u2019t have strict tire management programs in place might do better staying with dual tires. Fleets that take tire maintenance seriously and spec their equipment properly will see the weight and fuel savings gains. Nothing in life comes for free.<\/span><\/p>\n

\n
\n

 <\/p>\n

by Jim Park<\/a><\/p>\n

Source: https:\/\/www.truckinginfo.com<\/a><\/span><\/p>\n<\/div>\n<\/div>\n

\n
\n
\n
\n
\n

CUT COTS OF THE FLEET WITH OUR AUDIT PROGRAM<\/strong><\/a><\/h3>\n

\"\"<\/a><\/p>\n

The audit is a key tool to know the overall status and provide the analysis, the assessment, the advice, the suggestions and the actions to take in order to cut costs and increase the efficiency and efficacy of the fleet. We propose the following fleet management audit.<\/p>\n

FLEET MANAGEMENT AUDIT<\/strong><\/a><\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Photo: Jim Park Wide-base single tires offer fuel and weight savings, but getting the best life from the tire may require a little extra effort. When they first appeared on the market, wide-base single tires were touted as fuel- and weight-saving wonders. Nobody disputes the weight savings, but recent versions of low-rolling-resistance dual tires have…<\/p>\n","protected":false},"author":3,"featured_media":10040,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[18],"tags":[36],"_links":{"self":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10039"}],"collection":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/comments?post=10039"}],"version-history":[{"count":1,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10039\/revisions"}],"predecessor-version":[{"id":10041,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/posts\/10039\/revisions\/10041"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media\/10040"}],"wp:attachment":[{"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/media?parent=10039"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/categories?post=10039"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/advancedfleetmanagementconsulting.com\/eng\/wp-json\/wp\/v2\/tags?post=10039"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}